Fargo 82279 Cards Details
The Fargo Ultracard 82279 CR7910 adhesive-backed PVC cards with mylar backing are generally used by printing and then applying to proximity/technology cards. They are ideal for printing on most direct-to-card printers. Measuring 3.303'' x 2.051'', CR79 10 mil cards are designed to fit just inside of the inside edge of a proximity card. CR79 cards are slightly smaller and thinner than a typical credit card. The mylar backed version of adhesive cards are slightly thicker before printing which can make them easier to feed for many ID card printers.
Remember, if you will be placing these cards on pre-slotted access control cards you will need a slot punch to make a hole in this adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead.
Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
Note: Card thickness is 24 mil before removal of 14 mil adhesive back. 24 mil cards may not feed into every card printer. Please check your card printer specifications. If you are unsure if you printer is capable of printing on these thin cards, call us at (855) 836-4057 x2 or chat live.
Additional Info | Fargo 82279 Cards Specifications
? ? |
---|---|
Card Size | CR79 |
Material | PVC |
Printer Compatibility | C50, DTC1000Me, DTC1250e, DTC1500, DTC400, DTC4000, DTC4250e, DTC4500, DTC4500e |
Quantity Per Pack | 500 Per Pack |
Thickness | 10 Mil |